PRODUCTS & TECHNOLOGY
Single PrPMC/XMC Supports Three Freescale QorIQ Processor Families
Page 1 of 1
An air-cooled PrPMC/XMC module supports the Freescale QorIQ P3, P4 and P5 processor families. The XPedite5400 from Extreme Engineering Solutions joins the existing XPedite550x line of PrPMC/XMC modules that support the Freescale QorIQ P1 and P2 processor families. The complete line of QorIQ PrPMC/XMC modules provides processor mezzanine solutions that span a broad spectrum of embedded applications and satisfy a wide range of power, performance and feature requirements.
The XPedite5400 supports five processors across the QorIQ P3, P4 and P5 processor families. These include the P4040 processor with four PowerPC e500mc cores at up to 1.5 GHz, the P4080 processor with eight PowerPC e500mc cores at up to 1.5 GHz, the P3041 processor with four PowerPC e500mc cores at up to 1.5 GHz, the P5010 processor with one 64-bit PowerPC e5500 core at up to 2 GHz, and the P5020 processor with two 64-bit PowerPC e5500 cores at up to 2 GHz.
Key features include a Freescale P4080 processor with eight PowerPC e500mc cores at up to 1.5 GHz (alternate processors P3041, P4040, P5010, P5020) plus two channels of DDR3-1333 ECC SDRAM, up to 8 Gbyte (4 Gbyte each). In addition there are up to 16 Gbyte of user flash and 256 Mbyte of boot flash—with redundancy. There are three Gigabit Ethernet ports plus a x4 PCI Express interface to P15 and two SATA 3.0 Gbit/s ports to the XMC site. Supported operating systems include Linux, Wind River VxWorks and Green Hills Integrity in the form of BSPs.
Extreme Engineering Solutions